Rev. 1/4/2021
Page | 11
CHANGING PROGRAMS
Your ProFusion iH is configured to follow a pre-determined schedule. You may override the schedule by
changing the program manually using the
CH +/-
buttons on the remote control or selecting a program
from the Mood Controller app. If requested, the ability to change programs may be disabled on your
ProFusion iH. If you attempt to change programs and the Mood Controller app displays
YOU DO NOT HAVE
PERMISSION TO USE THIS FEATURE
, the ability to change programs has been disabled.
STEP 1
Open the Mood Controller app and follow the on-screen prompts to connect to your ProFusion iH
player
.
STEP 2
Press the button in the lower-right corner of the app.
STEP 3
Select the drop-down menu for
Audio Program
and select the desired program.
STEP 4
The ProFusion iH will fade out the current track and begin playing a track from the selected
program.
Looking to change programs for Zone 2?
Press the button in the top-right corner and select the desired zone from the
Zone drop-down menu.
If your ProFusion iH is scheduled to stop playback at a certain time, the Mood Controller app will display
MUSIC STOPPED
during that time. You may manually begin playback by selecting any available program.
UPDATING YOUR PROFUSION IH VIA CD
Select ProFusion iH models can be updated via CD. It is important to update your device as soon as you
receive any update CDs. Please note that clients with devices configured for Ethernet updates may still
receive CD updates, and should load them as soon as they arrive.
Always verify the update disc is clean and free of scratches, smudges and fingerprints. To clean a CD use a lint-free cotton
cloth and wipe against the tracks, starting in the middle of the disc and wiping towards the outside of the disc. Do not wipe
in a circular motion as this can create scratches.
STEP 1
If your update contains multiple CDs, locate disc #1
(discs are labeled as 1 of 3, 2 of 3, etc).
STEP 2
Hold the CD face up and by the edges
.
STEP 3
Press the DVD-ROM eject button to open the tray
.
STEP 4
Insert the CD into the center of the DVD-ROM tray.
STEP 5
Push the tray in fully (it will remain latched when properly closed).
