Rev. 1/4/2021
Page | 10
POWERING YOUR PROFUSION IH ON AND OFF
Always use the Power button on the back panel of the ProFusion iH to power off ProFusion iH before unplugging it from an
electrical outlet. Failure to do so may result in damage to the device.
POWERING ON PROFUSION IH
STEP 1
If the ProFusion iH is in standby mode (the power LED is red), press the button on the remote
control, or by select the option from the Mood Controller app to resume playback.
STEP 2
The power indicator will illuminate and alternate between green and red. After approximately 10
seconds, the power indicator should remain solid green
.
STEP 3
Playback will begin after approximately 15 seconds, at which time the playback LED should
illuminate solid green.
NOTE: If the power supply to your ProFusion iH is removed, re-inserting it into the back of the player will start the
initialization process above.
POWERING OFF PROFUSION IH
If your device is configured to receive its updates via Ethernet, your ProFusion iH must remain powered on at all times.
STEP 1
Place the ProFusion iH in standby mode by pressing the button on the remote control, or by
selecting the standby option from the Mood Controller app.
STEP 2
Approximately 10 seconds after the pressing the Standby button, ProFusion iH will enter a
Standby Mode. At this time playback on all zones will stop. The ProFusion iH can receive updates
via Ethernet in this mode. See section on ‘Standby Mode’
.
STEP 3
Once the ProFusion iH is in Standby Mode, remove the power supply from the back of the
ProFusion iH to complete the shutdown process. The ProFusion iH will not receive updates via
Ethernet in this mode
.
NOTE: Never remove the ProFusion iH power cord before pressing the “Standby” button.
STANDBY MODE
If it is necessary to stop playback on all zones immediately, press the Standby button once.
The music from all zones will fade down as your ProFusion iH enters Standby Mode. When your ProFusion
iH is in Standby Mode, all functionality remains active but all zones will stop playback.
To resume playback on all zones when in Standby Mode, press the
✱
or button on the remote control.
Your ProFusion iH will re-enter Playback Mode with the appropriate scheduled styles playing on all zones.
To completely shut down your ProFusion iH from Standby Mode, remove the power supply.
NOTE: If your ProFusion iH is configured for Network update, it will update at its scheduled time while in Standby Mode.
