ELECTRICAL SPECIFICATIONS:
Input Power: 120Vac/240Vac 1A/.5A
Power Consumption: 1Amp (120watts) at 120Vac
Power Output: 84VA at 24Vac, 52watts Heater/Blower, 32watts
Camera Power
GENERAL INSTRUCTIONS:
Tools Required (minimum)
.150” Flathead Screwdriver, 7/16” wrench or socket, 9/16” wrench or socket
PB24L900 Power Box
DESCRIPTION
PB24L900 is an 84vA Power Supply, designed for either 230Vac or
115vac input with 24Vac output. The unit includes a 900MHz wireless
transmitter and matching receiver with an omni-directional antenna.
Wall Mounting:
A template is provided in the back of the instruction with the 2 x 8 bolt
pattern required for the mounting of this product. Hardware is not provided
for mounting this unit to the wall.
Attach the unit securely with (4) fasteners
(not supplied)
.
Unit is designed to accept either 5/16”- 3/8" or 8mm hardware.
Each fastener should be able to withstand a minimum pull out force
of 600 lbs. (272kg)
Pole Mounting:
Optional pole mount brackets are available for the PB24. Pole adapter Part
Number is PBAP3.
Connecting Housing to PB24:
Open the packet assembly that is provided with each unit. Special s”
bolts are provided and designed to mount either the WM20G or the WM10
(Standard Fusion Dome and Rugged Housing wall mount bracket) to the
Power Box. Attach the wall mount bracket and housing as shown below.
ush the cable assembly connectors through either of the (2) holes provided.
Included with the PB24 are the following items:
!
IMPORTANT!
Unit will not seal properly unless installed as
shown. Do not attempt to use power box without installing wall
mount gasket.
NOTE:
Housing and
complete Power
Box not shown
for clarity only.
Wall Mount
Gasket
s
” Bolts
s
” Nut and Lockwashers
Washer
!
CAUTION!
These servicing instructions are for use by
qualified personnel only. To reduce risk of electric shock
DO NOT
perform any servicing other than that contained
in the operating instructions unless you are qualified to
do so.
!
An all pole main switch with a contact of at least 3mm in
each pole shall be incorporated in the electrical installation of
the building.
Wall
