background image

4.5  Rotopack MCG

Brief description

Rotopack MCG is the same as Rotopack MC

(

Ä

 Chapter 4.4  “Rotopack MC” on page 13

), how-

ever the ISO 228 connections threads are fitted

with the respective sealing surfaces (flat surfaces).

Fig. 8: Rotopack MCG

Area of application

Up to 210/350 MPa

Ä

 Chapter 3.3  “PV diagram” on page 10

4.6  Rotopack MCVR

Overview

Fig. 9: Rotopack MCVR

Brief description

Rotopack MCVR is the same as Rotopack MC

(

Ä

 Chapter 4.4  “Rotopack MC” on page 13

), but

has a primary sealing system which is adapted to

the operating conditions.

Area of application

Gas, air, water

The typical area of application is at pressure levels

of up to 1 MPa.

4.7  Rotopack M

Brief description

Rotopack M devices which may correspond to the

MCR, MC, MCG series. The devices do not corre-

spond to standard dimensions and can thus be

produced in almost any design. This achieves the

ideal adaptation of the product to the task.

Fig. 10: Example: Rotopack M

Area of application

Ä

 “Area of application”  on page 13

4.8  Rotopack BAT

Brief description

Rotopack BAT is a single-channel rotary feed-

through based on the Rotopack MC sealing

system (

Ä

 Chapter 4.4  “Rotopack MC”

on page 13

).

Rotopack • Operating instructions

 

 

14

Summary of Contents for GAT Rotopack BAT




























Reviews: