Fig. 11: Rotopack BAT
4.9 Rotokombi (option)
The Rotokombi design makes it possible to com-
bine the devices with all the manufacturer's other
media feedthroughs. The devices can be com-
bined with additional components for gas, water,
grease and oil for transferring electrical currents
and air. The best possible sealing technology is
used for each medium.
Example
Fig. 12: Example of Rotokombi with Rotodisk
(back)
Advantages of the Rotokombi technology
n
Modular construction
n
No limit for the media to be transmitted
n
Complete solution from a single source
n
No interface problems between the individual
components
Safety
For Rotokombi it is imperative that you
adhere to the operating instructions for all
the devices used.
The combination with other components and
transfer of other media may cause additional haz-
ards. If necessary, the owner must take additional
measures.
5 Transportation, packaging
and storage
5.1 Safety instructions
Suspended loads
WARNING!
Danger of fatal injury from suspended
loads!
During lifting operations, loads may swing
out and fall down. This may result in
serious injury or death.
– Never step under suspended loads,
and do not step within their pivoting
range.
– Only move loads under supervision.
– Only use approved hoists and lifting
gear with a sufficient load-bearing
capacity.
– Do not use torn or abraded hoists such
as ropes and straps.
– Do not place hoists such as ropes and
straps against sharp edges or corners
and do not knot or twist them.
– Set the load down when leaving the
workplace.
Rotopack • Operating instructions
15