4.5 Rotopack MCG
Brief description
Rotopack MCG is the same as Rotopack MC
Chapter 4.4 “Rotopack MC” on page 13
), how-
ever the ISO 228 connections threads are fitted
with the respective sealing surfaces (flat surfaces).
Fig. 8: Rotopack MCG
Area of application
Up to 210/350 MPa
Chapter 3.3 “PV diagram” on page 10
4.6 Rotopack MCVR
Overview
Fig. 9: Rotopack MCVR
Brief description
Rotopack MCVR is the same as Rotopack MC
Chapter 4.4 “Rotopack MC” on page 13
), but
has a primary sealing system which is adapted to
the operating conditions.
Area of application
Gas, air, water
The typical area of application is at pressure levels
of up to 1 MPa.
4.7 Rotopack M
Brief description
Rotopack M devices which may correspond to the
MCR, MC, MCG series. The devices do not corre-
spond to standard dimensions and can thus be
produced in almost any design. This achieves the
ideal adaptation of the product to the task.
Fig. 10: Example: Rotopack M
Area of application
“Area of application” on page 13
4.8 Rotopack BAT
Brief description
Rotopack BAT is a single-channel rotary feed-
through based on the Rotopack MC sealing
system (
).
Rotopack • Operating instructions
14
