3.4 Encoder
Fig. 3.6: “Initial commissioning - Encoder selection” dialog box
There is a database available for commissioning the encoder. This database
can be used to select from a large number of standard models.
If you are unable to find your encoder model or want to configure additional
settings, click on the "
Settings...
" button. For details see
Section
MOOG
ID
No.:
CB40859-001
Date:
02/2018
MSD Servo Drive - Device Help
24
3 Initial commissioning
3.5 Control
Fig. 3.7: “Initial Commissioning - Control” dialog box
You can use this screen to select the control mode for the device.
To determine the system’s inertia and configure position and speed control
settings, click on the "
Basic settings
" button. For details see
Section
"Basic
To access the “Control” screen, click on the "
Advanced >>
" button. For
details see
