19
REAR PANEL
The Moog One Rear panel is equipped with a full complement of audio jacks, communication
ports, MIDI connectors, and pedal ports – plus configurable CV In and CV Out connections – to
accommodate nearly any use.
POWER
Moog One uses an external power supply/adapter that
connects using a locking multi-pin cable. Orient the cable
correctly and slide it straight in until it locks. To remove the
cable, depress the locking tab on the connector plug and slide
the cable straight out. Hold the cable by the locking plug --
never pull on the cable directly. The Moog One On/Off switch
is located adjacent to the power port.
MAIN OUT/SUB OUT
Moog One features two sets of
stereo outputs, the
MAIN L
(Left)
and
MAIN R
(Right), and the
SUB L
(Left) and
SUB R
(Right). Both the
MAIN OUTS
and the
SUB OUTS
feature 1/4” balanced TRS jacks.
Each Synth can be assigned to
either set of outputs – or both.
NOTE:
The
SUB OUTS
are not affected by the
MASTER VOLUME
knob.
INSERT 1 2 3 4
Four
INSERT
jacks are provided.
Their routing is controlled by
pressing the Output Module
MORE
button. The tip of this tip-ring-
sleeve jack is wired as the Send,
so each
INSERT
jack can be used
as an individual output when used
with a standard unbalanced TS 1/4”
cable. Each Insert jack can also be
used with a Y-configuration insert
cable to achieve true insert functionality. The signal is returned to Moog One via the ring connection
of the tip-ring-sleeve jack. This allows the active Synth to be sent to, and returned from, an external
processor, while still maintaining its place in the internal mix. In addition, the ring/return connectors on
adjacent pairs of inserts (
1
&
2
,
3
&
4
) are stereo normalled, so that they can be used as stereo returns.
The way this works is that if nothing is connected to the return of Insert
2
, the signal returning via
Insert
1
will be summed to both the
MAIN L
and
MAIN R
outputs. Similarly, if nothing is connected to
the return of Insert
4
, the signal returning via Insert
3
will be summed to both the
MAIN L
and
MAIN
R
outputs.
Summary of Contents for One
