QoS Object (0x48)
Moog Animatics Class 6 EtherNet/IP Guide, Rev. B
Page 94 of 160
QoS Object (0x48)
The following tables provide the Class and Identity Attributes, and the Supported Services for
the QoS Object (0x48).
Class Attributes
Attrib
ID
Access
Rule
Name
Data
Type
Description
Semantics
1
Get
Revision
UINT
Revision of this object.
Default Value: 3
The current assigned
value is 1. If updates
require an increased
value, the value
increases by 1.
2
Get
Max Instance
UINT
Maximum instance num-
ber of this object.
Default Value: 1
The largest instance
number of a created
object at this class hier-
archy level.
3
Get
Number of
Instances
UINT
Number of object
instances currently cre-
ated at this class level
of the device.
Default Value: 1
The number of object
instances at this class
hierarchy level.
6
Get
Maximum
ID Number
Class Attributes
UINT
The attribute ID num-
ber of the last class
attribute of the class
definition implemented
in the device.
7
Get
Maximum
ID Number
Instance Attrib-
utes
UINT
The attribute ID num-
ber of the last instance
attribute of the class
definition implemented
in the device.
Instance Attributes
Attrib
ID
Access
Rule
Name
Data
Type
Description
Semantics
1
a
Set/Get
(NV)
802.1Q Tag
Enable
USINT
Enables or disables
sending 802.1Q frames
on CIP and IEEE 1588
messages.
Default Value: 0
0 = disabled
1 = enabled
Value change takes
effect the next time the
device restarts.
2
Set/Get
(NV)
DSCP PTP Event
USINT
DSCP value for PTP
(IEEE 1588) event mes-
sages.
Default Value: 59
DSCP field size is 6 bits,
valid range: 0-63
3
Set/Get
(NV)
DSCP PTP Gen-
eral
USINT
DSCP value for PTP
(IEEE 1588) general
messages.
Default Value: 47
DSCP field size is 6 bits,
valid range: 0-63
