background image

MOON 230D  CD Player

 

 

Specifications 

 

Configuration   .........................................................  Single-ended 
Transport Mechanism   .............................................  Proprietary Design 
Digital Filter / Digital-to-Analog Converter..................  BurrBrown PCM1793 
Frequency Response  (audible) .................................  20Hz - 20kHz +0/-0.2dB   
Frequency Response  (full range) ..............................  2Hz - 72kHz +0/-3dB   
THD @1kHz, 0dBFS (A-weighted)..............................  < 0.004% 
Intermodulation Distortion   ......................................  < 0.007% 
Dynamic Range  ......................................................  > 108dB 
Signal-to-noise Ratio   ..............................................  > 108dB @ full output 
Channel Separation   ................................................  > 103db 
Low Level Linearity  .................................................  ±1.0dB to below 120dbFS 
Intrinsic Jitter  .........................................................  < 325 picoseconds RMS 
Analog Output  ........................................................  1 pair Single-ended RCA’s 
Analog Output Impedance  ......................................  100

Ω

 

Max. Analog Output @ 0dBFS ..................................  2.0 Volts RMS 
Digital Output .........................................................  S/PDIF  RCA 
Digital Output Impedance - S/PDIF ..........................  75

Ω

  (0.5 Volts)   

Standard Remote Control  ........................................  Full-Function  (CRM-2) 
Power Consumption @ idle   .....................................  15 Watts   
AC Power Requirements   .........................................  120V / 60Hz  or  240V / 50Hz   
Shipping Weight  .....................................................  14 lbs  /  6.25 Kgs 
Dimensions  (W x H x D, inches) ..............................  16.9  x  3.5  x  13.1 

 

 
 
 
 
 

 

Fuse Replacement: 

For the 120V version use a 0.2A slow blow  (5 x 20mm size). 
For the 230V version use a 0.1A slow blow  (5 x 20mm size). 

 

 
 

 
 

 

 
 

____________________________________________________________________________________ 

 

Specifications  

  

 

 

                                                                      12

 

Summary of Contents for 230D













Reviews: