MOONEY
M20TN - MODEL TYPE-S
SECTION VII
AIRPLANE AND SYSTEM DESCRIPTION
7 -- 9
AIRPLANE FLIGHT MANUAL
ORIGINAL ISSUE -- 04-02-2008
9. GARMIN GDU 10(XX) PRIMARY FLIGHT DISPLAY (PFD)
See description in “Garmin G1000” earlier in this section.
10. GARMIN GDU 10(XX) MULTI--FUNCTION FLIGHT DISPLAY (MFD)
See description in “Garmin G1000” earlier in this section.
11. GARMIN GMA 1347 AUDIO PANEL
See description in “Garmin G1000” earlier in this section.
12. MAGNETO/STARTER SWITCH
Magneto/Starter switch combines both ignition and starting functions. Turning ignition key clock-
wise through R, L, and BOTH to START position and then pushing forward on key and recep-
tacle, engages starter. Releasing key when engine starts allows switch to return, by spring ac-
tion, to BOTH position.
13. ALTERNATOR FIELD SWITCH
This switch cuts alternator field power from main buss to alternator.
14. MASTER POWER SWITCH
Master switch operates battery relay which controls battery power (selected battery) to main
buss. This switch cuts ALL ship power OFF, except cabin overhead lights, baggage compart-
ment light and electric clock.
15. OPTIONAL -- Rotating/Flashing Beacon, etc.
16. STROBE LIGHT SWITCH/CIRCUIT BREAKER
Strobe light combination switch/circuit breaker turns wing tip and tail strobe lights ON. Should a
short occur, the combination switch/circuit breaker will automatically trip to the OFF position.
17. NAVIGATION LIGHT (NAV LITE) SWITCH/CIRCUIT BREAKER
Navigation light combination switch/circuit breaker turns wing tip and tail navigation lights ON.
Should a short occur, the combination switch/circuit breaker will automatically trip to the OFF
position. The glareshield and panel lights are also turned on when this switch is ON. Control dim-
ming of either glareshield or panel lights with rotating switches on lower console.
18. RECOGNITION LIGHT (LITE) (If installed)
Recognition light combination switch/circuit breaker turns recognition light ON. Should a short
occur, combination switch/circuit breaker will automatically trip to OFF position.
19. TAXI LIGHT (TAXI LITE) SWITCHES (L & R)
20. LANDING LIGHT (LDG LITE) SWITCHES (L & R)
Select and push split switches to turn desired set of lights ON. Push switches OFF to turn desired
set of lights off. Lights should be operated only for short time periods while not in flight to preclude
overheating of lamps. Overload protection is achieved by circuit breakers in panel.
21. GEAR SAFETY BY PASS SWITCH (Gear Retraction Override)
Gear safety override switch is a manual means of electrically by-passing the Air speed Safety
Switch. In the event the landing gear switch is placed in gear-up position, a properly operating
Revision B -- 11-21-2014