18
STRAC2 Hardware Manual
920-0118 Rev B
03/26/21
7.2 Specifications
7.2.1 Electrical Specifications
Electrical Specifications
Parameter
Min.
Typ.
Max.
Unit
Power Supply
90
-
240
VAC
Output Current (Peak)
0.6
-
2.5
A
Step Frequency
2
-
2M
Hz
STEP Minimum Pulse Width Hi and Low
250
-
-
ns
DIR Minimum Pulse Width
62.5
-
-
us
Under Voltage Protection
-
75*/135*
-
VAC
Over Voltage Protection
-
145*/295*
-
VAC
STEP/DIR Input Signal Voltage
4.0
-
28
V
OUT mxinmum output current
-
-
100
mA
OUT maximum voltage
-
-
30
V
*
Note:
when the input switch is on 115V status, under voltage protection point is 75VAC, over voltage
protection point is 145VAC.
When the input switch is on 230V status, under voltage protection point is 135VAC, over voltage
protection point is 295VAC.
7.2.2 Environmental Specifications
Environmental Specifications
Heat Sinking Method
Natural cooling or fan-forced cooling
Surrounding Air Conditions
Avoid dust, oily mist and corrosive air
Operating Temperature
0 - 40°C (32 - 104°F)
Maximum Ambient Humidity
90% non-condensing
Shock
5.9m/s² maximum
Storage Temperature
-10 - 70°C (14 - 158°F)
7.3 Matting Connectors
Part number
Manuf.
Desc.
2EDGK-7.62-02P-14-00A(H)
DEGSON
2 pin power connector
2EDGK-5.08-04P-14-00A(H)
DEGSON
4 pin motor connector
15EDGK-3.81-08P-14-00A(H)
DEGSON
8 pin I/O connector
