Note : it is advisable during the working day to check that the centre
section is drilling at the same depth as the wings, if not repressurise the wings
from time to time. This means that the manual divertor valve must be put
back from markers to wings and vice versa.
Work to Road
1. Ensure the drill is clear of all obstacles when folding the wings.
2. Change manual divertor valve to wings and engage mechanical wing
locks.
3. Ensure hopper is empty, and both markers are raised.
4. Raise drill to transport position and insert transport pins.
5. Lower drill onto transport pins.
6. Fully extend depth control ram.
7. Operate the hydraulics to fold the wings.
8. The drill is now ready to transport.
Note When transporting drill always press
button 5 on Head Land Control Joystick to
de – activate electro – hydraulic system
See also Head Land Control
Standard Head Land System
12
Summary of Contents for Unidrill-W Series
