Once registered, the next step is to set up Wi-Fi.
Turn on the robot. After it powers up, the Wi-Fi
shall stay in the “Wi-Fi Direct” Mode, which is the
out-of-factory condition. Use this App to scan Wi-Fi.
There should be Wi-Fi with the SSID name
“robot_scout_XXXXXX”. This is Scout. Connect to it
with default password “r0123456789”. You can play
with the robot already. If you want to set up the robot
as an IoT device, follow the App, select or type in
your home Wi-Fi SSID and provide the password.
This must be done in the “WiFi Direct” mode when
the mobile phone connects to Scout. If successful,