the charging station, including software OTA (over-
the-air) update, monitoring with motion detect, and
reboot.
Avoid heat sources or other battery-unfriendly
conditions to place the Charging Station.
6. Powering Scout On & Off
Press the “On & OFF” button for 2 seconds. The system
will power up and the Power LED will turn on. Press and
hold the button for 3 seconds to turn it off.
7. Reset to Factory Condition
To reset the robot, long press the “RESET” hole at the
rear of the robot. It will restore the factory condition
and unbind the robot from previous user account.
8. Connecting Scout
What you need: