4
Installing the Aluminum Marker Tray
1.) Install the Aluminum Marker Tray to the wall before you install your Visionary Board.
2.) Determine where you want your tray to be located and mark a line 1” above the
bottom edge of your board. Drill two 5/16” diameter holes in the wall 5 3/4” apart.
5 3/4”
Bottom of
Board
Line for Board
Mounts
Tray Mount
Line
C
D
P2
Push in two Plastic Anchors (C) into the predrilled holes. Place the Tray Mount (P-2) over the
Plastic Anchors (C) and secure with two CS Screws (D) as shown in Illustration #1.
3.)
Illustration #1
Place the Aluminum Tray (P-3) in the front slot of the Tray Mount (P-2) and align the holes.
Secure the Aluminum Tray (P-3) to the Tray Mount (P-2) using two Phillips Tray Screws (F).
See Illustration #2. .
4.)
Illustration #2
P3
P2
F
83843-83850ALM_3-13-12
