STEP 1
UPDATED AS OF: 04/16/2021
4 of 7
STEP 2
Insert Uprights into cut outs in Crossbrace. Insert screws through bottom of Crossbrace
to secure Uprights in position. Ensure holes in Uprights are facing direction shown.
Remove casting retainer screws from interior of cabinet. Set screws aside. Slide in
Mount Inserts through slots in castings making sure that Inserts are oriented correctly
with holes closer to back of cabinet. Flat side of Mount Inserts should face inside.
P1
P4
A
P3
P2
Left
Right
