Manual Part No: 932971-01 MD Gas Convection Oven
Page 5 of 32
Manual Rev No: 1
INTRODUCTION
This manual contains all the required information to ensure that your new appliance is installed correctly
and that you have all the information necessary to identify and order spare parts. It also contains
comprehensive instructions for the user and for cleaning the appliance.
To maintain peak performance, it is recommended that the appliance be regularly serviced and that
when ordering spare parts, reference be made to the appropriate list quoting the Part No. and the
description.
THE FITTING OF A NON-STANDARD PART MAY VOID ANY GUARANTEE
.
All work carried out on this appliance during installation or servicing must be performed by a competent
person and the connection of the appliance to the gas supply
MUST
be carried out by qualified
personnel in accordance, where applicable, with the relevant regulations.
The siting of the appliance and the connection to the gas/electrical supply must comply with the
GAS
SAFETY (INSTALLATION & USE) REGULATIONS 2000
: the requirements of the
FIRE PRECAUTIONS ACT
1971
; the
HEALTH & SAFETY AT WORK,
etc
ACT 1974
, the
BUILDING STANDARDS (SCOTLAND
)
CONSOLIDATION REGULATIONS 1971
. Detailed recommendations are contained in British Standards
BS5440: Part 1: 2000, BS5440: Part 2: 2000, BS5588: Part 0: 1996, BS5588: Part 11: 1997 & BS6173:
2001.
The installation must comply with the requirements of Local Authority Regulations and the wiring must
comply with the latest I.E.E. Regulations.
An easily accessible stopcock must be fitted in the gas supply adjacent to the appliance for use in an
emergency. In addition a fused isolator must be fitted in the electricity supply.
The details of the gas supply will be found on the Data Plate, which is located on the rear of the flue
upstand/splashback panel.
WARNING: THIS APPLIANCE MUST BE ELECTRICALLY EARTHED
Improvements
The policy of Viscount Catering Ltd is such that, each product is subject to continual development and
may, therefore, be subsequently improved. The company reserves the right to alter the design of any
appliance without prior notification and without responsibility to update any delivered or in-service
appliance and furthermore, without incurring the responsibility for altering these instructions. In such
circumstances, it may be found that the appliance detailed herein differs in certain respects from the one
supplied.
IT IS IMPORTANT, THEREFORE, TO QUOTE THE SERIAL No. AND THE APPLIANCE MODEL No. IN ALL
COMMUNICATIONS WITH THE COMPANY.
