MOOSE V80FL-S, User Manual

7

OPERATION

BEFORE GETTING ONTO YOUR SCOOTER

- Have you fully charged the batteries? (See page 5, “Batteries and 

charging.”)

- Ensure that the clutch realease lever in the open (power driven) po-

sition. Never leave the clutch realease lever in the close position unless 

you are manually pushing your scooter.

- Ensure that the tiller lock knob is in the locked position. (See page 9, 

“Disassembly and assembly.”)

OPERATING YOUR SCOOTER

- Set the speed adjustment dial to your desired speed. Set the high/low 

switch for how much power you will need. Setting the switch to “high” 

will increase the speed of the scooter 

- Press the throttle control lever to move and 

release the lever to stop

. 

The 

green

 lever moves the scooter forward, and the 

red

 lever moves the 

scooter backward.

Note: your scooter’s backward speed is slower than the forward speed 

for safety reasons.

ELECTROMAGNETIC INTERFERENCE 

Electromagnetic interference (EMI) from sources such as radio and TV stations, amateur 

radio (HAM) transmitters, two-way radios, and cellular phones can affect powered scooter 

and motorized scooters.  Following the warnings listed below should reduce the chance of 

unintended brake release or powered scooter movement, which could result in serious injury.

1) Do not operate hand-held transceivers (transmitters-receivers), such as citizens band 

(CB) radios, or turn ON personal communication devices, such as cellular phones, while the 

powered scooter is turned ON.

2) Be aware of nearby transmitters, such as radio or TV stations, and try to avoid coming 

close to them;

3) If unintended movement or brake release occurs, turn the powered scooter OFF as soon 

as it is safe.

4) Be aware that adding accessories or components, or modifying the powered scooter, may 

make it more susceptible to EMI (Note:  There is no easy way to evaluate their effect on the 

overall immunity of the powered scooter.

5) Report all incidents of unintended movement or brake release to the powered scooter 

manufacturer, and note whether there is a source of EMI nearby.

If unintended motion or brake release occurs, turn the power OFF as soon as it is safe.   

FDA recommends that you report all incidents of unintended motion or brake release to us 

or your dealer, and if possible, note whether there was a radio wave source nearby at the time 

of the incident. You may also report to FDA’s Med Watch problem reporting program. Call 

1-800-FDA-1088 and ask for Form 3500.

The following warning label is included in order to make users always aware that a possibility 

of electromagnetic interference exists.

We highly recommend you visit the support page on our website, moosemobilityscooter.

com/support, to learn more about electromagnetic interference.