9
ENGLISH
8.4.5 Seat
Before sitting , place the rollator on a flat and solid surface and then lock the brakes.
Make sure the latch of the lock is secured properly and that the rollator is in a stable position.
WARNING! Questions to sit down with your weight on the seat assembly.
Do not sit by pushing only on one side.
9. HOW TO USE
• Start pushing when you are in an upright position with both hands on the handle;
• Make sure your hands are dry before using the rollator to avoid the risk of slipping;
• Walking maintaining an upright position with his eyes facing forward and not down;
• Do not push the rollator too far away from the body, this may cause falls
and loads inadequate;
• Do not use the rollator to overcome steps higher than 20mm;
• When using outdoors, prefer the sidewalks properly prepared in accordance
regulations for the removal of architectural barriers;
• To overcome small obstacles to leverage the rear footrests to raise the front of the rollator
(models RP540 - RP545 - RP550 - RP551)
10. BRAKES
10.1 To brake
To brake the rollator pull the brake lever with your fingers upwards until the rollator slows down
or stops. To continue to move the rollator, release the brake handles.
10.2 Lock the brake (handbrake)
Press down on the brake lever with the palm of your hand, when you hear a “click” wheels are
locked. Lift the handle of the brake releasing it from the stop position.
WARNING! When the user is stationary, the brakes must be locked
11. CARE AND MAINTANANCE
The devices MOPEDIA by Moretti SpA on the market are carefully checked and carry the CE mark.
For the safety of the patient and the doctor is recommended to be checked by the manufacturer or
by an approved laboratory, at least every 2 years, the suitability for use of your rollator. If repairs
are to be used only original spare parts and accessories.
The useful life of the product depends on the use, maintenance, storage and cleaning.
12. CLEANING
To clean parts, use only a damp cloth with a neutral detergent, not use cleaners containing solvents
and metal brushes or abrasive or sharp objects, may damage the product.
13. WHEEL CARE
1. Clean the wheels with warm water and mild detergent. Wipe dry with a clean cloth.
2. Periodically lubricate the wheels.
Summary of Contents for GAYA 2.0
