5
ENGLISH
7.1 Parts List MP170 and MP171
Fig.1 (Picture with illustrative purpose only)
A. Lateral bedside rails (2 Pcs)
B. Telescopic tubes (2 Pcs)
8. ASSEMBLING/DISASSEMBLING
8.1 Assembling
1. Place the telescopic tubes on the floor and insert the bedside rails into the vertical tubes. (Fig.2)
2. Place the assembled structure on the bed.
3. Adjust the width of the transverse elements to the width of the bed by using the push button.
Note: Push the telescopic tubes as close as possible to the bed frame, so as to eliminate the
play that can be created between the bed frame and the bedside rail.
Fig.2 (Picture with illustrative purpose only)
4. Then place the mattress above the bed (the weight of the mattress and the patient help to keep
securely the bed side rail).
5. If you need, you can fix the telescopic bedside rails on the bed frame using some belts (not included).
