10
11
3. Press the “Jump Start” button and wait for a solid green light.
NOTE: A flashing green light indicates safety checks are in progress.
Do not disconnect the jumper cables when the Jump-Start button is
illuminated solid green. If you wish to cancel a jump-start attempt, simply
press the Jump-Start button again and the solid green light will turn off
indicating that the jump-start attempt has been cancelled.
4. Start your vehicle.
NOTE: If your vehicle fails to start after the first attempt, wait 30 seconds and
repeat step 3 and step 4. If your vehicle does not start after three attempts,
we recommend you consult a certified mechanic.
5. Disconnect the jumper-cable clamps from the car battery.
NOTE:
- The jump start function can not be used in conjunction with USB
charging or the air compressor. Please ensure that you have not activated
the USB or Air Compressor output modes when attempting to jump start
your vehicle.
- When attempting to jump-start your vehicle, turn off your headlights
and any other components that may drain your car battery.
- The powerstation go air is designed to allow a jump start when used
within a safe temperature range. A “TEMP” indicator will be illustrated on
the digital display if used outside of the temperature operating range.
Jump start troubleshooting tips
Condition
Potential Cause
Solution
The Jump-Start button has been
pressed but nothing happens
The USB ON/OFF Button or
the Air Compressor ON/OFF
Button has been pressed.
The jump start output can not
be used in conjunction with the
USB output or air compressor
modes. Ensure that both USB and
AIR Compressor modes are off.
powerstation go air displays a
red “BATT TOO LOW” message
The powerstation go air is
not sufficiently charged to
jump start the vehicle.
Recharge the powerstation go air
and verify at least 50% charged. Then
try the jump start process again.
powerstation go air Jump
Start button flashes red
and a SAFETY CHECK FAIL
message is displayed
The jumper cables have not
been properly connected
to the vehicle battery.
Check the jumper cables and ensure
that the red clamp is connected
to the positive terminal (+) and
the black clamp is connected
to the negative terminal (-).
powerstation go air Jump
Start button flashes
green continuously
The powerstation go air is
waiting to be connected to
a battery or a SAFETY CHECK
FAIL has been triggered.
Check the jumper cables and ensure
they are properly connected to the
battery. Check and ensure the vehicle
battery voltage is greater than 2.0V.
If the SAFETY CHECK FAIL indicator
is triggered during the jump start
process, it is recommended that you
consult with a certified mechanic.
powerstation go air displays a
blue or red “TEMP” indicator
The powerstation go air
has detected a low or high
temperature condition.
Disconnect the powerstation go
air and allow unit to acclimate
to temperature operating range
(14°F-122°F) (-10°C - 50°C).
You can not successfully
jump start your vehicle.
The powerstation go air
displays a vehicle battery
voltage greater than 12.0V
The powerstation go air
detects that it is connected
to a vehicle battery with a
normal starting voltage. This
could indicate that another
vehicle component is faulty.
It is recommended that you consult
with a certified mechanic.
powerstation go air Jump
Start and On/Off button
flashes red and white
This could occur when
attempting to jump start a
vehicle while other electrical
components (i.e. headlights,
heater, radio, etc.) are on.
Turn off your headlights and
any other components that may
drain your car battery and try
the jump start process again.
The vehicle battery
may be faulty.
It is recommended that you consult
with a certified mechanic.
NOTE: If none of these troubleshooting tips work, please consult a certified
mechanic for assistance.
PRO
JECT
:
PS-GO-AIR | QSG
DIMENSIONS:
112mm x 178mm
BLEED:
.125
CREA
TIVE DESIGNER:
Sarah
PRODUCTION AR
TIS
T:
Sarah
PDM:
Jessica / Mik
e
PCM:
Kaitlyn
DA
TE:
January 7
, 2021 2:38 PM
ARENA: 314-00934 REV: A
SPECIAL INSTRUC
TIONS:
•
Saddle S
tit
ched book
let
, 20 pages
.
•
RevA1_121820
•
Shar
ed acr
oss all HSN SKU
s:
401107388, 401107389, 401107390,
401107391, 401107392, 401107393,
401107429
COL
ORS: CMYK
+
Pantone 377C
powerstation go air | HSN | Quick S
tart Guide
English
