Page 42
© 2011 Maka Technologies Group. All Rights Reserved.
Maintenance of GPS navigator
GPS navigator will be a reliable navigation and entertainment companion if
protected by right methods. Please follow the instructions below to ensure your
GPS run smoothly for a long time.
Protect screen: Don’t press the screen with strength or you will destroy it.
Please use the stylus to operate the navigator and spray a little glass cleaner
on the soft cloth to clean the screen, don’t spray on the screen directly.
【
Note
】
Be sure to turn off the GPS navigator before cleaning.
√ Drop or strike will cause damage to high-precision components.
【
Note
】
Accidental damage is beyond our responsibilities.
√ Don’t use it under such environment: Temperature change abruptly (high
temperature above 60°, low temperature under-10°), high voltage, dusty,
electrostatic interference, avoid any corrosive liquid and dip into any liquid.
√ Avoid radiated interference: The radiated interference from other electronic
products will affect the display and it will be normal after suppressing the
interference source.
【
Note
】
If you carry the unit by air, please put the GPS together with your
luggage to pass the X-ray detection system. Avoid scanning by the magnetic
head detector (at the passage used for passing) or the magnetic bar (held by
the security checker), or it will destroy the system date in the unit. We will take
no responsibility for it.
Avoid direct, intense light: Don’t use the GPS navigator in high light and
ultraviolet radiation in order to increase the using life.