17
ENGLISH
12. ASSEMBLY AND DISASSEMBLY
WARNING!
•
Take care over any pinching points when attaching the rear frame to the front
frame. During assembly, check the warning labels at the pinching points;
•
Pinching and crushing risk! There is an increased risk of pinching or crushing,
due to the weight of the components (such as the batteries), when preparing the
scooter for transport or during maintenance activities. Always take extreme care
over every operation. Use the help of another person if possible, particularly when
storing the parts to be transported;
•
Check that all the scooter components have been correctly assembled. After
assembly, check that all locking devices are correctly inserted by raising the rear
frame, to check that the transmission is locked in position;
•
Incorrect assembly can cause injury! Check that all the scooter components have
been correctly assembled. After assembly, check that all locking devices are
correctly inserted;
•
Check that all basic components are present.
13. DRIVING
13.1 Driving up and down
NOTE:
For your first driving session, check that the scooter is being driven on a flat surface
and will continue to be driven on a flat surface.
BEFORE YOU GET ON THE SCOOTER
•
Check that it is switched off. This will avoid accidentally activating the paddle controls and
causing injury to yourself or to others;
• Check that the scooter brake handle is in the engaged position;
• Check that the wheel unlocking lever is in the engaged position.
WARNING!
Keep your weight towards the centre of the platform when getting on/off the scooter.
Shifting your weight towards the edge of the platform could cause instability!
GETTING ON THE SCOOTER
• Position the seat so that you can get on safely and easily;
• Return the handlebar to the vertical position;
•
Carefully place one foot at the approximate centre of the platform and sit on the seat
comfortably and safely;
• Fasten the safety belt, if the scooter has one;
• Lower or reposition the armrests in place;
• Insert the key in the ignition;
•
Turn the key to the ignition position, as shown in Fig. 9.
Fig. 10
shows the key in the
switched-off position.
Summary of Contents for ARDEA MOBILITY 220
