10
ENGLISH
3) Insert the headrest in its housing and block it in
place at the desired height by tightening the rear
knob.
4) Connect the joystick to the wheelchair through the
cable on the right armrest.
5) Attach the joystick to the support bar, using the
four screws provided. Slide the connection cable as
shown in the figure.
N.B.
The position of the joystick can be changed
from the right armrest to the left armrest. It is
recommended to contact the retailer for positioning
of the controller.
5) Mount the two footplates, by inserting the support
in the structure, attaching them using the screws
present in the structure itself and taking care to
match the right side and the left side correctly.
The footrests must always be inside the wheelchair.
Lower the footrests and adjust the footplates to the
desired height
(fig.4)
(fig.4)
(fig.5)
(fig.6)
