21
ENGLISH
• Place the armrest rear side into the rear, then hook them into the front by
overturning them
(FIG.7, FIG7A, FIG7B)
• To remove, unlock the armrest by pushing the front release lever, then overturn them and
extract by pulling the rear release lever
(FIG.8, FIG.8A, FIG.8B)
7.4 Install/remove the swing away or elevating legrest
(FIG.11)
•
Assembly the swing away or elevating legrest
by installing the hinge plates on the footrest
onto the hinge pins on the wheelchair frame.
Push the legrest toward inside of the wheelchair
until it locks into place
(FIG.11)
•
Remove the legrest by pushing the legrest release
lever in ward, rotate outward, lift the legrest off the
hinge pins
7.5 Adjust the swing away legrest
(FIG.10)
•
To adjust the length of the footrest, unlock
the safety lever at the bottom on the left side,
then press the push button, slide the tube until
the desired hole, then relock the safety lever.
(FIG.10)
7.6 Adjust the elevating legrest (OPTIONAL)
(FIG.11)
•
To adjust the length of the footrest, unlock
the safety lever at the bottom on the left side,
then press the push button, slide the tube until
the desired hole, then relock the safety lever.
(FIG.11)
(Rif.P)
•
Adjust the legrest height by pushing the
lever
(FIG.11)
(Rif.L)
, and release to lock
at the desired height
Summary of Contents for ARDEA ONE
Page 30: ...30 ENGLISH Note...
Page 31: ...31 ENGLISH Note...
