22
ENGLISH
7.7 Install/remove the 30cm wheels (just for DUAL)
(FIG.12)
•
Place the caster into the hole
on the wheelchair frame
•
Remove the plastic cap and
push the caster until it locks
into the place
(FIG.12)
•
Removing by pushing the button on
the centre of the caster, and extract
the caster
(FIG.12)
7.8 Adjust the brakes with 30cm wheels (just for DUAL)
(FIG.13)
•
When the 30 cm casters are installed,
place the brake on the milling.
Lock the device by tightening
the Allen wrenches
(FIG.13)
Note
adjust the brake device
so that it can make the right
pressure to securely lock the caster
7.9 Install/remove the 60cm wheels (just for DUAL GO)
(FIG.14)
•
Place the caster into the central
hole on the wheelchair frame
•
Remove the plastic cap and
push the caster until it locks
into the place
(FIG.14)
•
Removing by pushing the button
on the centre of the caster,
and extract the caster
(FIG.14)
Summary of Contents for ARDEA ONE
Page 30: ...30 ENGLISH Note...
Page 31: ...31 ENGLISH Note...
