14
ENGLISH
5.4 Assembling warnings
• Verify that both handle support tubes are correctly inserted in the frame and secured with
locking knobs locked into the holder with its main wing nuts and knobs;
• Both handle tubes are securely locked in the main support part with wing
nuts and knobs;
• Do not hanging anything on the rollator frame to avoid distortions of the tubes
when the rollator is open and damage the stability. Injury may also be caused by distortions;
• Take care to entrapment of fingers and / or clothing during the opening and closing.
6. BEFORE USE
Before using the device, always check:
1. That all parts of the rollator are locked in a secure manner.
2. Check that all screws are tight.
3. Make sure that the seat is properly locked
(if that ‘not press further with the power seat bottom frame).
4. Check that the locking of the seat is correctly inserted.
5. Check the correct operation of the brake and the regular brake.
7. GENERAL DESCRIPTION
7.1 Parts description (Mod. RP515) Atlante 1.0
1
2
5
6
7-8
3
4
FIG. 1 (Picture with illustrative purpose only)
1. Rollator Frame (1 pc)
2. Backrest with Push-buttons (1 pc)
3. Handlebars (2pcs)
4. Bag/basket (1 pc)
5. Front Wheels (2pcs)
6. Rear Wheels (2pcs)
7. Star Knobs (2pcs)
8. Screws and Curved Washers (2pcs)