8
9
OPERATION INSTRUCTIONS
OPERATION INSTRUCTIONS
4. Select a heat setting by touching the “-” or “+” control.
• If no heat setting is selected within 1 minute, the hob will automatically power off. You will need to start
again at step 1.
• The heat setting can be altered at any time during cooking.
• Hold down either of the (-) or (+) buttons to adjust up or down.
AFTER COOKING
1. Touch the heating zone selection control to power off.
2. Turn the cooking zone off by touching the “-” and scrolling down to “0”. Ensure the display
shows ”0”.
3. Power off the cooktop completely by touching the “ON/OFF” control.
4. Beware of hot surfaces
“H” will show which cooking zone is hot to touch. It will disappear when the surface has cooled down
to a safe temperature. It can also be used as an energy saving function to heat other pans by using the
hotplate that is still hot.
LOCKING THE CONTROLS
• You can lock the controls to prevent unintended use (for example children accidentally turning the
cooking zones on).
• When the controls are locked, all the controls except the ON/OFF control are disabled.
TO LOCK THE CONTROLS
Touch the keylock control. The timer indicator will display “Lo”.
TO UNLOCK THE CONTROLS
1. Ensure the hob is turned on.
2. Touch and hold the keylock control.
3. The hob is now ready for use.
When the hob is in the lock mode, all other controls are disabled except the ON/OFF control. The
ceramic hob can always be powered off with the ON/OFF control during an emergency, but the hob
should be unlocked first before the next operation.
OVER-TEMPERATURE PROTECTION
This appliance features a temperature sensor to monitor the temperature inside the hob. When excessive
temperature is detected, the hob will halt all operation automatically.
RESIDUAL HEAT WARNING
When the hob has been operating for some time, there will be some residual heat. The letter “H” will appear
on the cooktop to warn you to exercise caution.
AUTO SHUTDOWN PROTECTION
• Auto shut down is a safety protection function for your hob.
• It will shut down automatically whenever you forget to power off your cooking.
• The default shutdown times are shown in the table below:
USING THE TIMER
You can use the timer in two different ways:
• You can use it as a minute minder. In this case, the timer will not turn any cooking zone off when the set
time is up.
• You can set it to turn one cooking zone off or more than one after the set time is up.
• You can set the timer for up to 99 minutes.
6
H
Power level
1 2 3 4 5 6 7 8 9
Default working timer (hour)
8 8 8 4 4 4 2 2 2