7
trOuble sHOOting
IMPORTANT: Refer to the checklist below if your designer hood appears to have malfunctioned before
contacting the Customer Care Department.
1. Designer hood will not start.
• Check that the hood is connected to the electricity supply
• Check that the fan speed control is set correctly.
2. Designer hood is not working effectively.
• The fan speed is not set high enough
• The grease filter is dirty and requires cleaning.
• The kitchen is adequately ventilated.
• If the hood is set up for recirculation mode, check that the carbon filters do not need replacing.
• If the hood is set up for extraction mode, check that the ducting hose and discharge outlet are not blocked.
3. Designer hood switches off during operation.
• The safety cut-out device has tripped.
• Turn off the hob and then wait for the safety cut-out device to reset.
IMPORTANT
• If you have installed your designer hood too low, the safety cut-out device will frequently trip. Your designer hood
may become damaged if the safety cut-out device is tripped frequently.
• If your appliance appears not to be operating correctly, then you should disconnect it from your mains supply and
then contact the Customer Care Department.
DO NOT ATTEMPT TO REPAIR THE APPLIANCE YOURSELF.
2
c O n t e n t s
3
3
4
4-5
5-6
6
7
IMPORTANT NOTES
SPECIFICATIONS
INSTALLATION
CAUTION
OPERATINg INSTRUCTIONS
CLEANINg AND MAINTENANCE
TROUBLESHOOTINg
MDH-912ST(IM)100412_Layout 1 4/17/12 5:21 PM Page 4
