background image

4

5

PARTS IDENTIFICATION AND SPECIFICATION

SAFETY PRECAUTIONS

Before  starting  the  installation,  consideration  should  be  given  to  the  difficulties  to  be  found  during

installation. Installation must be undertaken by a qualified and competent person conforming to the rules

concerning  the evacuation  of contaminated  air. The manufacturer disclaims  all  liability for  any  damage  or

injury caused because of not following the instructions for installation contained in the following text.

1.   Always ensure that the appliance is disconnected from the power supply and allow it to cool down completely before

     cleaning and do not unplug the appliance with wet hands.

2.   Before connecting to the power supply ensure that the power voltage corresponds with the voltage on the rating 

     plate inside the hood.

3.   Ensure that the installation of any earthing cable is not connected to water pipes, lightning rod or telephone lines to

     avoid electric shock.

4.   Ensure that the wall must have sufficient strength to support the weight of the appliance.

5.   Ensure that the appliance is horizontally.

6.   Distance between exhaust holes on the wall shall be less than 1.5m.  Do not install the exhaust pipe too high to avoid

     oil flowing backwards.

7.   Ensure that the room is has adequate ventilation when operating the appliance.

8.   The air exhaust from this appliance should not be channeled to the flue of burning gas or other fuels.

9.   If the power cord is damaged, it should be inspected and repaired by a suitably qualified technician or returned to 

     the manufacturer for further action.

10. Always turn off the power supply when replacing lamps.  New lamps must be the same specification as the current

     ones.

11. It is dangerous to alter the specifications or to modify this appliance in any way. Do not tamper with it or attempt to

     alter it in the attempt to customize it further.

12. This appliance is not intended for use by persons (including children) with reduced physical sensory or mental 

     capabilities, or lack experience and knowledge, unless they have given supervision or instruction concerning the use
     of the appliance by a person responsible for their safety.

13. Children should be supervised to ensure that they do not play with the appliance and its parts and accessories.

14. Educate children about the danger and safety rules associated with operating electrical appliance.

15. Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged

     in any manner. Repairs and services should only be carried out by suitably qualified technicians or by the authorized
     service center.

1

2

3

4

5

Thank you for purchasing a quality MORGAN appliance. We  trust that you will have a pleasant  experience

with your new product. To guarantee safety and best efficiency, please read this manual carefully and keep

a copy for future reference.

DIMENSIONS

WIDTH (CANOPY)                                              900mm

HEIGHT (WITH CHIMNEY)                                 515+440mm

DEPTH (CANOPY)                                               500mm

SPECIFICATIONS

MODEL                                                                MDH-923STOC

MATERIAL                                                           Stainless Steel + Tempered Glass

VOLTAGE / FREQUENCY                                    220-240V~ 50/60Hz

TRANSMISSION STYLE                                       Single Motor

LED LIGHTING POWER (LAMP)                         2 x 1.5W

CONTROL                                                            3 Speed Touch Switch

FILTER                                                                  Baffle Filter

MOTOR SPEED                                                   3 Speed

MOTOR POWER                                                 190W

EXTRACTION CAPACITY                                    1300m³/hr

1.   Hood

2.   Control Panel

3.   Glass

4.   Filter

5.   Oil Cap

MDH-923STOC(IM)281216.qxp_Layout 1  12/29/16  5:14 PM  Page 3

Summary of Contents for MDH-923STOC







Reviews: