4
IMPORTANT SAFEGUARDS
5
PARTS IDENTIFICATION
SPECIFICATIONS
•
This appliance should not be installed near open flames or other heating appliances
where the likelihood of burning or high heat could occur.
•
Do not install this appliance in oily places where fire, explosion, short circuit and electrical
shock can occur.
•
Avoid contact with moving parts. Do not touch the ceiling fan blades with any objects
during operation.
•
Do not install the ceiling fan at places where there is high vibration and impact. The
possibility of ceiling fan dropping is high and will cause injury.
•
Do not operate it for purposes other than its intended use.
•
Always disconnect the appliance when relocating it.
•
The ceiling fan must be mounted above 2.5m from the floor and at least 1m from the wall
to the fan blade.
To avoid injuries caused to users or any damage to properties, please follow all the
symbols with explanations written below.
WARNING
CAUTION
1
2
3
4
5
6
9
10
11
12
15
8
7
14
13
1. Pulley
2. Bolt
3. Upper Canopy
4. Canopy Screw
5. Pipe
6. Bolt
7. Cotter Pin
8. Nut
9. Terminal
10. Lower Canopy
11. Blade Screw
12. Fan Blade
13. Condenser
14. Safety Wire
15. Shaft
This is the safety alert symbol.
This symbol alerts you to hazards that can be potentially dangerous to you and others.
This symbol alerts you to hazards that may cause damage to property.
This symbol indicates a MANDATORY action.
This symbol indicates a PROHIBITED action.
MODEL NO. MFC-EURUS 360 BK / WH / BW / GR
RATED VOLTAGE 220-240V~
FREQUENCY 50HZ
RATED WATTAGE 80W
BLADE SIZE 60 INCH
