d.
REMOTE CONTROLLER OPERATION
Point the remote controller at the receptor on body of the fan and press the
desired button. The remote controller will work at distances of up to
roughly five meters and the angle of 30 degree included between right and
left from the receptor.
The batteries must be removed from the remote controller before it is
scrapped and that they are disposed of safely.
e.
OVERHEAT PROTECTION OF THE MOTOR
The windings of the motor have a thermal-fuse that burns out and the fan
switches off and temperature of the motor is no longer going up so that
plastic parts of the
fan don’t subject to deformation so far so to be burned
by the overheat if the motor is overheat for any unexpected reason.
I.
Control Panel (Fig.9)
These keys of the control panel may be used as same as of the remote
controller.
II.
Tilt Adjustment
To adjust the air flow upward or downward, push the grilles lightly to the
desired direction.
III.
Height Adjustment
The height of the fan can be adjusted by loosening the height adjustment
ring carefully raising or lowering the fan and firmly re-tightening the height
adjustment ring.
iv
. Power off / off memory
Fan shutdown or power off, the power is switched on again starts, will be
operating in the state of shutdown or power off (not before the timing
function of memory).
8
Summary of Contents for MSF-16P3R
Page 1: ...Stand Fan MSF 16P3R ...
Page 11: ......
