6
7
OPERATION INSTRUCTIONS
CARE AND CLEANING
● Set your fan on a level dry surface.
● Insert the power cord into 220-240V volley AC power supply.
● Your high velocity fan features 4 speeds designed to give you maximum flexibility and
to meet all your air circulation requirements, from low to med speed. These settings can
be used for most of your needs. However when you want to have maximum air
movement, use the high setting. Select the desired speed for your needs by using the
rotary control switch.
● Adjust to your desired air stream by tilling the fan assembly to the required position.
1. Turn the control to OFF and unplug the fan before cleaning.
2. Use only a soft, damp cloth to clean the fan.
3. Do not immerse the fan in water and never allow water to drip into the motor housing.
4. Do not use gasoline, paint thinner or other chemicals to clean the fan.
5. To clean the fan blade, use 2 screw-drivers to disengage the hooks (8 hooks) holding
the front guard to the rear guard.
6. Remove the front guard.
7. Wipe the blade and guard.
8. Reassemble the fan by snapping the front guard into place.
9. Store the fan in its original box or cover the fan to protect in from dust store it in a
cool dry place.
TROUBLESHOOTING
PROBLEM SOLUTION
The fan blade does not rotate when Have you inserted the power plug into the power
turned on supply?
Is the front/rear guard incorrectly assembled
thereby obstructing fan blade movement?
Has the motor short circuited or malfunctioned?
Abnormal noise during operation Is the blade assembled onto the shaft correctly
and securely tightened?
Is the front/rear guard incorrectly assembled
thereby obstructing fan blade movement?
Is the fan blade or the motor loose?
MSF-20MI1(IM)291216.qxp_Layout 1 1/6/17 5:46 PM Page 4
