7
CARE & CLEANING
6
OPERATING INSTRUCTIONS
CLEANING THE APPLIANCE UNIT
•
Unplug the appliance and allow it to cool down completely before cleaning. Caution: do not immerse
the mixer in water or any other liquids.
•
Wipe over the exterior surface of the mixer head and base using a damp cloth and dry off with a soft
dry cloth.
•
Wipe any excess food particles from the power cord.
•
Immerse the mixing bowl, beaters and dough hooks in warm soapy water for thorough cleaning.
Rinse under running water and wipe dry. The beaters and dough hooks are dishwasher-safe.
CLEANING THE DETACHABLE STEM
•
Unplug the appliance and remove the detachable stem.
•
Wash the detachable stem under running water, without the use of abrasive cleaner or detergents.
After cleaning the detachable stem, place it upright so that any water which may have got in can drain
out. The stem is dishwasher-safe.
•
NOTE:
Do not immerse the detachable stem of the blender in water because overtime the lubrication
on the bearings may erode.
•
Wipe the motor unit with a damp cloth and allow to dry thoroughly.
•
Never immerse it in water for cleaning as electric shock may occur.
COOKING TIPS
•
Ensure refrigerated ingredients such as butter and eggs are at room temperature before mixing
begins. Set these ingredients out ahead of time.
•
To eliminate the possibility of shells or deteriorated-off eggs in your recipe, break eggs into separate
container first before adding them to the mixture.
•
Do not over-beat. Be careful that you only mix/blend mixtures recommended in your recipe. Fold into
dry ingredients only until just combined. Always operate at low speed.
•
Climatic conditions. Seasonal temperature changes, temperature of ingredients and their texture vary
from one area to another and all influence the required mixing time and the results achieved.
•
Always start mixing at lower speed. Gradually increase to the recommended speed as stated in the
recipe.
•
Quick cleaning: Between processing tasks, hold the hand-held blender in the cup half filled with water
and turn on for a few seconds.
ENVIRONMENT FRIENDLY DISPOSAL
ou can help protect the environment! Please remember to respect the local
regulations and hand in the non-functional electrical equipment and parts to an
appropriate waste disposal centre.
IMPORTANT:
•
Do not exceed 15 seconds operating time without load.
•
Do not exceed maximum operation of 1-minute under high speed.
•
Ensure a 1-minute rest interval between two consecutive cycles.
1. Use the handle to pull the mixer head upwards and hold it in the upper most position while inserting
the blending rod and turning it clockwise until tightened.
2. To detach blending rod, press the ejector button, turn the blending rod in anticlockwise direction to
release it automatically.
3. Connect the hand-held blender’s power plug into a power supply.
4. Dial the speed selector to desired blending setting.
5. Lower the blending rod into food and depress the turbo button.
6. To stop the hand-held blender, release the turbo button.
