49
www.morganadvancedmaterials.com
Insert Registered Legal Entity name, address and number, or all other details as required to comply with regional regulations
49
Reading and Comparing Values
•
When a chart is displayed it is possible to follow the profile and obtain specific information along the
length of the profile; this can be done by placing the cross-hair at the required point and clicking the left
mouse button. Once this is done a horizontal and vertical line will appear, and the values indicated by the
cross-hair are displayed in the top right-hand corner of the chart
•
Note that the cross-hair can be moved by pressing the left and right arrows on the keyboard
Adjusting Profiles
There are 6 different buttons available to allow the user to adjust the way in which the profiles are displayed
and mean that profiles that were taken on the same machines, but from different starting positions, can be
aligned.
Move the profile left by one bar/segment
Move the profile right by one bar/segment
Return the profile to its original position
Mirroring the profile
When there are 2 or more profiles this aligns the profile to
the highest bar/segment
When there are 2 or more profiles this aligns the profile to
the lowest bar/segment