E-mail: electrical.appliance@dksh.com
www.morgan.my
Market Expansion
Services by
www.dksh.com.my
facebook.com/morganappliances
USER MANUAL
3 Speed
Remote-Control
Wall Fan
MWF-NB165RT
USING THE REMOTE CONTROL CORRECTLY
ACCESSORIES
• Point the remote controller at the receptor on the base of fan stand and press the
desired button.
• The remote control will work at a distance of up to about six meters and at an angle
of 60 degree from right or left of the receptor.
• The batteries must be removed from the remote controller before it is scrapped to
ensure they are disposed of safely.
A
RULES FOR SAFE OPERATION
1. Never insert fingers, pencils or any other objects through the grille when fan is in operation.
2. Disconnect the fan when moving from one location to another.
3. Disconnect the fan when removing grilles for cleaning.
4. Ensure fan is placed on a stable surface when operating to avoid overturning.
5. DO NOT expose the fan to rain, water or other liquids, as it may damage the motor and pose a safety hazard.
OVERHEAT PROTECTION OF THE MOTOR
The motor has a built-in thermal-fuse that cuts off the power supply if it is overheated. This prevents the plastic parts
of the fan from damage and deformation due to the high temperatures caused by an overheated motor.
CLEANING
• Be sure to unplug from the electrical supply before cleaning.
• Plastic parts should be cleaned with mild soap and a damp cloth or sponge. Thoroughly remove soap film with
clean water.
• To disassemble each part, reverse the assembly order.
CAUTION:
If the power cord is damaged, it is strongly recommended to have it serviced an authorized service agent.
Receptor
Remote
Controller
B
C
A. Remote Control (1)
B. Mounting (1)
C. Screw (3)
