6
SPEED SELECTION
• Pull on the Fan Speed Switch to select desired speed.
0 = Stop
1 = Low Speed
2 = Medium Speed
3 = High Speed
ADJUST DIRECTION
• Gently push & tilt the front grille to the desired Up/Down direction.
OSCILLATION SELECTION
• Pull on the oscillation pull switch to oscillate the fan.
• Pull again to stop oscillation.
OPERATING INSTRUCTIONS
7
30º
CARE & CLEANING
WARNING:
1. Switch off the fan and disconnect from the power supply before removing the guard
for cleaning.
2. Disassemble the fan guard and blade from the fan motor and control assembly before
cleaning.
3. Clean only the fan’s surface & body using a mild detergent and soft cloth.
4. Allow to dry completely before reassembly.
NOTE:
1. If supply cord is damaged, have it replaced by a qualified technician.
2. Add a few drops of lubricant onto the base of motor shaft after cleaning to extend
motor life.
MWF-NC168MS(IM)171117.qxp_Layout 1 11/20/17 4:19 PM Page 4