T10170
OPERATOR MANUAL BM 60
21
4.1.3 Block stapling, option 1
1. Open the top cover.
2.
Select Double stapling with the double/single stapling switch.
3.
Adjust the side guides to proper paper size by loosening the side guide screws.
4.
Position the stapler heads above the correct anvils (see table in section 4.1.8).
5. Insert one set.
6.
Make the final adjustment by loosening and moving the right side guide up against the
set and then back 1 mm.
7. Set desired staple position with the paper stop crank.
8.
Load the stapler magazines. By pressing the stapler magazine release button the
magazine will come out.
NOTE:
Use only Chisel point staples P/N 800001.
9. Close the top cover.
10. Set the stapling switch to
ON
position.
11. Set the folding switch to
OFF
position.
12.
Flip down the fold stop to enable the sets to pass through the machine.
13.
Take off the Belt Stacker or Delivery Tray. Mount the adapter on the brackets (1) on
Booklet Maker and mount the Belt Stacker/Delivery Tray on the adapter (2).
14. Continue to section 4.2 OPERATION
NOTE:
By using the adapter (optional) either the Belt Stacker or the Delivery Tray can be
used for stacking of stapled sets.
1
2
Summary of Contents for BM 60
