13
MB 200
rev.0.1UL ID01460
2. TRANSPORT
CAUTION!
For no reason the staff is authorized to pass under a suspended load
during transport or in the vicinity of it.
CAUTION!
The transport phase will have to be carried out by trained competent
and authorized personnel, equipped with the necessary personal safety
protections.
The binder must be moved by means of a forklift. It can only be lifted by forking the two long sides,
the front and rear side.
For the final positioning or for small movements a trans-pallet can be used.
The machine can be only lifted with a trans-pallets in the 2 long sides, the front and rear side.
IMPORTANT
a)
Tools for clamping and lifting are not provided.
b)
The disposal of packaging materials is at the recipient’s care and must be performed in
accordance with the laws in the country where it will be carried out.
c)
Remove dust and external dirt accumulated during the transport phases.
3. DISPOSAL
If you decide to stop using the machine, or some part of it, the disposal and decommissioning of the
same must be carried out.
The machine must be handed to designated wasted recycling centres and disposed of according to
the country’s current regulations. Electrical and electronic parts should be disposed of in accordance
with Directive 2012/19 / EU.
5500 NE Moore Court
Hillsboro, OR 97124
Toll Free: 1-800-944-4573
Local: 503-640-5920
