21
MB 200
rev.0.1UL ID01460
5.5 OPERATOR PANEL
The operator panel contains the configuration of the machine parameters and allows editing and the
choice of processing mode.
5.5.1 MAIN PAGE
1.
Machine pre-set button icon;
2.
Carriage parameter page access button
icon;
3.
Glue group page access button icon;
4.
Press button icon, to access the
press operation page;
5.
Processing recipes access button icon;
6.
Parameters setting access button icon;
7.
Displays the name and the recipe number
currently loaded;
8.
Cleaner or glue cycle button Icon;
9.
Icon, machine speed set button;
10. Icon, button to access the alarm page (red
with active alarms);
11. View setting of the glue stop values left
and right.
12. Value to set pressing time;
13. Book parameters setting and type of
processing button icon;
14. Icon, button to access the book counter
page;
15. Displaying disabled press;
16. Viewing disabled cutter;
17. Displaying that a correction value was
applied to the vise;
18. Displaying that a correction value was
applied to the extruder;
19. They indicate the current temperatures of
the pre-melting and head;
20. Indicates the position of the book block
with respect to the cover;
21. Viewing thickness of the set book;
22. back cover hit value;
23. Current value measurement table;
24. If yellow it indicates that compensations
values were applied to the pressure of the
tank;
If red it indicates that the machine is in
manual tank pressure mode;
200
2
3
4
5
6
15
16
17
18
14
10
7
19
20
1
11
13
22
21
23
8
9
12
24
25
26