23
MB 200
rev.0.1UL ID01460
5.5.3 CARRIAGE PARAMETERS (2)
2a
2b
The value (
2a
) is editable from -10 mm to +10 mm, this makes the clamp move forward (positive
sign) with respect to the cover or backward (negative sign) during the machine cycle. The result is
that the cover may protrude or fall compared to the book block.
Pressing on the hand (
2b
) will go to the page for the manual movements.
In order to make movements forward, backward or to preset the carraige you need to select the
direction (a checkmark will appear ) and press the left dual control of security to the desired position.
The value (
2d
) indicates the current position of the clamp. The preset of the clamp can also be
performed from this page by selecting the left hand icon
3.0
999999
50
50
999
99
99
10
130
120
10 FREE
1-30
and press the left dual control
security until the end of the operation. Pressing the icon to the right of the preset will reset the axis
of the vise.
The value (
2c
) sets a correction value to the opening of the clamp (0 ─ 5 mm).
The value (
2e
) displays the present value of opening clamp.
2c
2e
2d
