58
MB 200
rev.0.1UL ID1460
8.1 END OF WORK CLEANING
01
In order to turn off the machine at the end of the day you
have to remove the glue from inside the extruder.
To do this you must activate the automatic procedure
which will guide you to perform a safe shutdown.
Press and hold the button
3.0
999999
50
50
999
99
99
10
130
120
10 FREE
1-30
for a few seconds, to
start the procedure.
02
During this stage, the glue unit prepares for daily cleaning,
follow the instructions on the display step by step.
Replace the grains from the head and remove the excess
cleaner.
Press the button
until the traces of glue disappear,
make use of the calibrated blade in this operation.
Press OK.
Use the green spatula provided and drain the glue to the
collection tank. Try to remove as much as possible the
spilled glue.
Press
until you can make sure that only the
cleaner is coming out of the extruder.
Press OK
