Page 30
CREASING / BOOKLET MAKING
Setting the Machine up as a Booklet Maker
Trimmer is Off
Set Trimmer
Home
More
NOTE.
Definitions of Set Knock types.
Setting the Trimmer.
the set during both stapling and folding without releasing. This is
(ii) Move the selection switch to the right, one click at a time, (selecting
)
until the display contains the words
.
(iii) Move the Selection Switch down to select
.
(iv) Move the Selection Switch to the right to turn the Trimmer On (if required)
More
Set Trimmer
Set Trimmer
Long Knock:-
Double Knock:-
PreStitch Delay:-
Pre-Fold Delay:-
Set Trimmer
Setup
Selects long side-knock which causes the infeed sidelays to hold
useful if the booklet is not being folded square, however it is
essential that the sheet width is set accurately.
Selects double knock which causes the infeed sidelays to
actuate twice prior to stapling. This ensures that the booklet
is jogged into a uniform book.
This adjusts the time delay between the side knock and
stapling; this is sometimes useful in ensuring a tidy set.
The default setting is 200ms, but the setting can be adjusted
between 200ms and 900ms.
This adjusts the time delay before folding. The default setting
is 300ms, but the setting can be adjusted between 300ms
and 900ms. Reducing the value will increase the book making
Speed
10. From the Booklet Maker start up menu, the
can be set as
follows:-.
(i) Move the selection switch to the right to select
.
