Page 32
CREASING / BOOKLET MAKING
Setting the Machine up as a Booklet Maker
(iii) Move the selection switch to the right, one click at a time, (selecting
)
until the display contains the word
.
(iv) Move the selection switch down to select
(v) Rotate the Selection Switch to select the Program number (1 to 9).
(vi) Move the selection switch to the right to select
.
(vii) Move the selection switch to the left to select
or to the right to select
To run the job with the selected settings.
(i) Press the Compressor Switch down.
(ii) Press the System Switch down.
(iii) Move the selection switch down to begin feeding the sheets.
To stop feeding the media at anytime during the program, flick the selection
switch up.
Any of the nine stored programs can be accessed and read as follows:-
(i) From the start up menu, move the selection switch to the right to select
.
(ii) Move the selection switch to the right, one click at a time, until the display
contains the word
.
(iii) Move the selection switch down to select,
.
(iv) Move the selection switch to the right to select,
.
(v) Rotate the selection switch clockwise or anti-clockwise to select,
to
and view the program settings.
More
Programs
Save Settings.
Select
Yes
No.
1. For Settings and Adjustments to the Booklet Maker Unit see the
Booklet Maker operators manual 70-114.
2. If your machine is fitted with the optional ‘Camera Recognition’ system
see the instruction details on pages 34 To 38.
Running the machine
Reading stored programs
Setup
Programs
Retrieve Program
Select
Program 1
Program 9
Clearing Booklet sheets from the Booklet Maker Infeed Tray.
NOTES.
13.
If for any reason the Feed switch is turned off, during booklet making operation,
booklet sheets may remain in the Booklet Maker infeed tray.
To clear the sheets through into the Booklet Maker, (to be folded and stapled),
follow steps (i) and (ii) on next page.
