Page 4
CREASING / BOOKLET MAKING
INTRODUCTION
The crease is programmed from the leading edge of the sheet using the
controls on the front panel.
The blade and anvil are mechanically controlled over their entire length
and can be adjusted to accommodate various weights of media
.
Maximum sheet size:-
630mm x 330mm (24.8” x 13”)
Minimum sheet size:-
210mm x 140mm (8.27” x 5.5”)
Maximum sheet weight:- 400 gsm
Minimum sheet weight:-
80 gsm (160 gsm when creasing and folding).
Maximum number of creases:- Nine
Minimum distance between creases:- 4.0mm
Minimum incremental adjustment:-
0.1mm
Minimum crease distance from leading edge:- 30.0mm (1.2”)
Minimum crease distance from trailing edge:-
30.0mm (1.2”)
Production up to 5000 sheets / hour, (one crease on A4 sheet).
CREASER UNIT SPECIFICATION
The Morgana DocuMaster MK3 is a fully automatic, suction feeding, creasing
/ booklet making system; designed for use with both conventional litho and
digital printers.
the operating environment should be controlled to a temperature
between 10
The system comprises a creasing unit linked to a fully automatic booklet
making machine, the creasing unit and booklet maker can be used
separately to give optimum flexibility.
The feed system incorporates an ultrasonic detector system to ensure
complete booklet integrity.
The feed on the Documaster MK3 can also be manually operated for use with
heavy stock, very small or very large sheets, embossed or even irregular
sheets.
IMPORTANT
°
°
C and 30 C and at 35 - 85% relative humidity.
DocuMaster MK3
