background image

 

Ignoring this mark could result in the possibility of 

serious injury or even death.

 

Ignoring this mark could result in the possibility 

of injury or physical damage.

 

 

Safety precautions  

Watch the following remarks and warnings during the operation of the machine. This way you will 

prevent any possible danger, personal injury or damage of the machine.   

 

Power supply 

This unit shall be installed near the socket-outlet where the plug on the power supply cord is easily 

accessible.   
Make sure the power supply used is always within the following range: 

Power supply:  

220 – 240 V AC, 50 Hz (EU) 

   

 

 

120 V AC, 60 Hz (North America)

 

If other appliances are powered by the same AC outlet, make sure that the combined power 

consumption does not exceed the power supply capacity. 

Rated current (Rated power): 

0,4 A (EU), 0,85 A (North America) 

 

Warning! 

Make sure that the power supply is in accordance with the information on the rating label. Using 

other voltage can result in a fire or any other damage of the machine or in an electrical shock. 

Make sure that the combined power consumption of the appliances to be connected does not 

exceed the capacity rating of the power outlets or plug receptacles. Exceeding the capacity rating 

could cause the power outlets, plug receptacles or the power extension cords to overheat and 

catch fire. 

 

 

Ignoring this mark could result in the possibility of 

serious injury or even death. 

Ignoring this mark could result in the possibility of 

injury or physical damage. 

This mark indicates a „Warning“ or „Caution“. 

A graphic may be shown inside the mark to describe the warning or caution more specifically. 

This mark indicates a forbidden action. 

A graphic may be shown inside the mark to describe the warning or caution more specifically. 

This mark indicates actions that must be performed. 

A graphic may be shown inside the mark to describe the action to be performed more specifically. 

WARNING 

CAUTION 

Summary of Contents for TF MEGA-S
























Reviews: