DAILY INSPECTION A-11
7.
CLEANING THE DRAIN OIL RECEIVER FOR THE
LUBRICATING OIL
If the drain oil receiver for the lubricating oil is at the rear or the side of the machine, dispose of the
waste oil before the drain oil receiver becomes full.
The drain oil receiver is provided to prevent lubricating oil being mixed into the coolant. It is
effective when water-soluble coolant is used to prevent deterioration of the coolant due to mixing
of lubricating oil.
(1) Because impurities are contained in the drain oil, do not reuse the oil in the lubrication
tank. Always use fresh lubricating oil when replenishing the lubrication tank.
(2) Entrust the disposal of waste oil and coolant to a party qualified to dispose of
industrial wastes or a gas station with the appropriate facilities.
(3) The drain oil receiver is not available for some models.
These models collect the drain oil in the coolant tank.
For details on the disposal of waste oil, refer to FOREWORD in this manual.
NOTE
