าᧇ
CAUTION LABELS
32
1.
˿ᢉوᢆᣱ࣊ɂǾʋʭʍɹǾʁʴʽʊǾȝɛɆผщȽȼɁ
ᜬ߁وᢆᣱ࣊ɁșȴȺǾఊɕͲȗوᢆᣱ࣊͏˩ɥ͎Ȫȹ
ȢȳȨȗǿ
1.
Specify a spindle speed limit that is lower than the lowest of
the individual allowable speed limits for the chuck, cylinder,
and fixture.
ᵘʹ˂ɹɁ᭣ɆҋȪǾ̷ᡵ̜ǾൡಽɁᆍૺᵚ
[Workpiece ejection/Serious injury/Machine damage]
2.
˿ᢉɥوᢆȨȮɞȻȠǾɑȲǾوᢆɥඨɔɞȻȠɂǾ˿ᢉ
وᢆᣱ࣊ɥఊͲᣱڒȾȪȹȢȳȨȗǿ
2.
Before starting or stopping the spindle, set the spindle
speed to the lowest setting.
3.
˿ᢉوᢆ˹Ⱦᣱ࣊ʶʽʂɥҒɝఉțɞȻȠɂǾɑȭوᢆᣱ
࣊ɥ˩ȥȹȢȳȨȗǿ
3.
Lower the spindle speed before changing the speed range
while the spindle is rotating.
4.
ʋʭʍɹ٢Ǿ॑ઃᢉӌȽȼɂǾӏࡾస͔ȾȕȶȲ٢ӌȾ
ȪȹȢȳȨȗǿ
4.
Select the proper chucking pressure and tailstock spindle
thrust pressure appropriate for the machining conditions.
5.
ʹ˂ɹɗࡾщɂᆬȾɹʳʽʡȪȹȢȳȨȗǿɑȲǾҒҭ
ɁҒᣅɒǾᣞɝɂͲȗ᪡ȞɜܿɔȹȢȳȨȗǿ
5.
Clamp workpieces and tools securely. Depth of cut and
cutting feed must be selected beginning with small values.
6.
˿ᢉɥوᢆȨȮɞҰȾǾʹ˂ɹȟᆬȾੰધȨɟȹȗɞȞ
ᆬᝓȪȹȢȳȨȗǿɑȲǾʅʽʉʹ˂ɹӏࡾɁکնɂǾ॑
ઃᢉʅʽʉȟᆬȾʹ˂ɹɥઃȪȹȗɞȞɕᆬᝓȪȹȢȳ
Ȩȗǿ
6.
Before starting the spindle, secure that the workpiece and
rotary tool are clamped correctly. For center-work
machining, also check that the tailstock spindle center is
pressing the workpiece correctly.
5-8
˿ᢉوᢆᣱ࣊Ȼੰધӌ
Spindle Speed and Gripping Force
1.
˿ᢉوᢆᣱ࣊ȟ˨ȬɞȾȷɟǾʋʭʍɹɁྲȾᤕ॑ӌȟ
ᄉႆȪǾʋʭʍɹɁੰધӌȟͲ˩ȪɑȬǿ
ʋʭʍɹɁੰધӌȟ፟ધȨɟȹȗɞȞǾްఙᄑȾੰ૱ӌ
ȺລްȪȹȢȳȨȗǿੰધӌȟ፟ધȨɟȹȗȽȗکնɂǾ
ʋʭʍɹʫ˂ɵ˂ɗʁʴʽʊʫ˂ɵ˂ȾᣵፅȪȹȢȳȨ
ȗǿ
1.
As the spindle speed increases, centrifugal force acts on
the chuck jaws reducing the chuck gripping force.
Measure the chuck gripping force at regular intervals using
a gripping force meter to secure that the required gripping
force is maintained. If it is not, contact the chuck
manufacturer and the cylinder manufacturer.
ᵘʹ˂ɹɁ᭣ɆҋȪᵚ
[Workpiece ejection]
2.
˿ᢉɁوᢆᣱ࣊ȻੰધӌɁᩜΡɂǾྲɗʹ˂ɹɁ۾ȠȨǾ
ढǾ͇ȤৰǾҒҭస͔ǾȝɛɆΈႊȪȹȗɞʋʭʍ
ɹȽȼȾɛɝႱȽɝɑȬǿ
2.
The relationship between gripping force and spindle speed
varies depending on the size, shape and mounting
conditions of jaws and workpieces, cutting conditions, and
the chuck used.
1
ᝊጯɂǾΈႊȪȹȗɞʋʭʍɹʫ˂ɵ˂ɗʁʴʽʊʫ˂
ɵ˂Ɂᝢం
1
For details, refer to the instruction manual supplied by the
chuck manufacturer and the cylinder manufacturer.
3.
ӏࡾȬɞȻȠɂੰ૱ӌɥΈȶȹǾӏࡾȾȝȤɞ˿ᢉو
ᢆɁʋʭʍɹੰધӌɥລްȪȹȢȳȨȗǿ॒ᛵȽʋʭʍ
ɹੰધӌȟीɜɟȽȗکնǾʋʭʍɹ٢ɗ˿ᢉɁوᢆᣱ
࣊ǾҒҭɁᣞɝᣱ࣊ɗҒᣅɒᦀȽȼǾӏࡾస͔ɥ۰Ȫ
ȹȢȳȨȗǿ
3.
When machining, measure the chuck gripping force applied
during spindle rotation at the actual machining speed using
a gripping force meter. If the required gripping force is not
maintained, change machining conditions such as the
chucking pressure, spindle speed, feedrate, and depth of
cut.
Summary of Contents for NL1500/500
