ൡಽͽ
MACHINE OPERATION
36
7
ൡಽͽ
MACHINE OPERATION
8
Բ᪙
8
DANGER
1.
ൡಽΈႊɁҰȾໃɻ˂ʠʵɗ፷ɁᚱᛷȟૺϾȪȹȗ
ȽȗȦȻɥᆬᝓȪȹȢȳȨȗǿ
ᵘᵚ
1.
Confirm all cables are properly insulated prior to
machine operation.
[Electric shock]
2.
༧ɟȲਖ਼ȺͽȪȽȗȺȢȳȨȗǿ
ᵘᵚ
2.
Do not operate with wet hands.
[Electric shock]
3.
ί឴ɵʚ˂юɗوᢆǾժӦ͇ᣋȾ̷ɗ᪩࿎ȟȽȗȦ
ȻɥᆬᝓȪȹȞɜᤆᢆɥܿɔȹȢȳȨȗǿ
ᵘࢊᣅɑɟǾᚗሶᵚ
3.
Confirm no personnel or obstacles remain inside
protective covers or close to rotating or moving parts
before starting machine operation.
[Entanglement/Collision]
8
ឬ֖
8
WARNING
1.
ൡಽ֚ᣃɗюȾ̷ɗ᪩࿎ɁȽȗȦȻɥᆬᝓȪȹȞɜൡ
ಽɥͽȪȹȢȳȨȗǿൡಽɁժӦȾɂᣋȸȞȽȗȺȢ
ȳȨȗǿ
ᵘ̷ᡵ̜ǾൡಽɁᆍૺǾࢱຒᵚ
1.
Before operating the machine, confirm there are no
personnel or obstacles around or inside the machine.
Keep distance from moving parts.
[Injury/Machine damage/interference]
2.
յʃɮʍʋɗʦʉʽǾɷ˂ɂǾȰɁͱᏚȻൡᑤɥɛȢᆬᝓ
ȪȹȞɜǾᆬȾͽȪȹȢȳȨȗǿ
ᵘൡಽɁͽӦᵚ
2.
Before using a switch, button, or key, perform visual
confirmation and then press or set decisively to avoid
selection errors.
[Mechanical error]
3.
̈́റɁ۰ǾൡಽɁᣲȝɛɆʛʳʫ˂ʉɁ۰ȟ॒ᛵȽ
کնɂǾࣷᇋȾȧᣵፅȢȳȨȗǿ
ᵘൡಽɁॴᑤǾߧ֤ɁͲ˩ᵚ
3.
Do not change machine specifications, parameters or
modify the machine without prior consultation with
Mori Seiki.
[Impaired machine performance/Machine service life
reduction]
4.
Ғҭస͔Ⱦɛɝ᮶ᬩȟᄉႆȬɞժᑤॴȟȕɞکնɂǾ᮶ᬩ
ȟ۾ȠȢȽɜȽȗɛșҒҭస͔ɥ۰ȬɞȞǾᄉႆȬɞ᮶
ᬩȾख़ȫȹί឴щɥᅔႊȪȹȢȳȨȗǿ
ᵘᐱᜁɁૺϾᵚ
4.
When operating noise may be produced, change
cutting conditions to limit the generation of noise or
ensure the operator wears protective gear to avoid
injury due to excessive noise levels.
[Impaired hearing]
1
ൡಽ᮶ᬩʑ˂ʉɂǾҝё
“
ൡಽͽᝢం
”
1
For the machine noise data, refer to the separate volume,
“OPERATION MANUAL”.
5.
టൡɂ᩻ྭ̈́റȺɂȕɝɑȮɦǿʓɬɥᩐɔȲৰȺɕǾ
۾ټɁʹ˂ɹȽȼȟᯚᣱوᢆ˹Ⱦ᭣ɆҋȪȹ˫țɞᚗɗ
ʨɺʗʁɰʪȽȼɁᦂࠖӏࡾȾᄉႆȬɞየھɁ᭣ୠ
ɗྭᄉȽȼɁԲ᪙ɥީпȾ᩻ȣȦȻɂȺȠɑȮɦǿʓɬɗ
ȰɁͅɁί឴щɥᤈαȮȭǾͽഈȾɂԚґȽาɥȶȹ
ȢȳȨȗǿ
5.
This is not the explosion-proof specification machine.
Dangers such as the ejection of a large workpiece or
harmful dust or an explosion caused by the machining
of metals such as magnesium are not preventable even
if the door is closed. Do not rely on door and protective
devices alone. Recognition of the dangers involved in
machining procedures is required at all times.
6.
ɴʤʶ˂ʉᴥпӏࡾઆछᐐᴦɂǾൡಽΈႊǾί឴ʫɶʗ
ɥᅔႊȪȹȢȳȨȗᴥʫɶʗᅔႊᐐֆɓᴦǿ
ᵘየھȟᄻȾоɞȽȼɁ̜ᵚ
6.
Operators must wear safety glasses at all times,
(including operators wearing prescription glasses).
[Eye damage due to ejected foreign matter]
7.
ਖ਼ᚨɥȪȹൡಽɥΈႊȪȽȗȺȢȳȨȗǿ
ᵘࢊᣅɑɟǾ᪩Ǿ̷ᡵ̜ᴥඳ̪ᴦᵚ
7.
Do not wear gloves when operating the machine.
[Entanglement/Machine malfunction/Serious injury
(death)]
8.
ʹ˂ɹȾࢎɗȬɝɥछȹȹᆅҭȪȽȗȺȢȳȨȗǿ˪Ⱦ
ࢊȠᣅɑɟɑȬǿ
8.
Do not grind workpieces with emery cloths. It may get
entangled.
9.
2
̷͏˨ȺൡಽͽɥᚐșکնɂǾȝ̠ȗȾնَȪȕȶȹǾ
ԚґาȪȹͽഈȪȹȢȳȨȗǿ
ᵘ̜ᵚ
9.
When the machine is operated by more than one
operator, cooperation and communication between
them is required at all times.
[Accident]
10.
˿ᢉɗյوᢆȾᣋȸȞȽȗȺȢȳȨȗǿ
ᵘࢊᣅɑɟǾɂȨɑɟᵚ
10.
Keep distance from spindle or other rotating parts.
[Entanglement]
Summary of Contents for NL1500/500
